MasterPiece Arms

Manufacturer of precision bolt action chassis and rifles, MAC-style pistols, accessories and more.

Showing 1–21 of 34 results

Filter
  • MPA Brass Catcher

    $219.99 Read more

    Tired of losing brass at your PRS, NRL or Club/Regional Series event? The MPA Brass Catcher is designed for you….

    Attaches via the scope base pic rail on your bolt gun. The wire frame that holds the pouch is adjustable “front to back”and “up and down.”

    Subtle adjustments can also be made to the wire frame to get the exact fit you want.

    The hinge will position the brass catcher closed (up against the ejection port) or open (90 degrees to the ejection port) for easy removal of the brass after your stage.

    Holds 15+ pieces of full size short action caliber brass (308, 6.5 & 6mm Creedmoor, etc) or more of smaller brass types such as 6BR, 6BRA, Dasher, etc.

    Works only with short action cartridges.

  • Sale!

    MasterPiece Arms BA Comp Chassis – MPA Rem 700 Short / Long

    $1,299.00$1,397.00 Select options
    • This chassis will fit Remington 700, Defiance Deviant, Bighorn TL3, Surgeon 591, Curtis Custom, and Impact Precision Short Actions.
  • MPA BA Bolt Action Mount

    MPA BA Bolt Action Mount

    $389.99 Select options

    The BA Series Mounts are designed to mount high-performance optics onto your Bolt Action rifles with Picatinny Rail Scope Bases. The 1″ & 30mm versions have a center line height of 110%. 34mm models offer push-button fit for either aluminum or steel rails, while 35 mm and 36-inch long scopes can use the standard mounting hole pattern at either end, which measures 125 mils +/- .0015″. This interface ensures positive engagement on both spec positions and specs ones, so you don’t need specialized tools!

  • MasterPiece Arms ( MPA ) Mag Feed Lip Adjustment Tool

    $18.00 Read more

    Description

    This tool comes in handy when adjustments are needed to the feed lips of your metal AR15, AR15 or Bolt Action Box Magazines to improve feeding.

    If your feed lips get tweaked, if you drop your magazine or simply have feeding issues due to feed angle of your loaded cartridge, then use this tool to make the necessary adjustments.

    There is a single cut on the tip of the adjustment tool to engage the feed lips of these two types of magazines.

    As a top ranked PRS shooter stated: “No more ruining your mags by trying to adjust them with a multi-tool”. I know Ive jacked up several of them so I sure others have also.”

    Made from Aluminum, Cerakoted Black, and will not scar or scratch your mag finish.

  • Sale! MasterPiece Arms Matrix Chassis

    MasterPiece Arms Matrix Chassis

    $1,649.00$1,780.00 Select options

    This is and enhanced version version of our highly successful BA Chassis System.

    The Matrix Chassis was designed as a the most revolutionary chassis ever produced. With the multitude of configurations in grips, thumb rests and trigger finger supports, the primary interface between the shooter and the rifle (the grip) has over 100 different options. Please refer to the photos above to see our data on shooter preference on the grips, thumb rests, and trigger finger supports.

  • MasterPiece Arms ( MPA ) Cheek Riser Pad

    $13.99 Read more
    Product Details

    This is a replacement Cheek Riser Pad. Self Adhesive and Laser Engraved with MPA Logo.

  • MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT - MPA

    MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT – MPA

    $229.99 Add to cart

    The Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:

    • Steel Enhanced Bag Rider – 1.2 lbs
    • Steel Monopod Weight – 1 lb
    • Front Fore-end Weight – 1.2 lbs
    • Rear Fore-end Weight – 1 lb
    • 8 Front Fore-end clamps
    • 8 Button Head Cap Screws for the clamps
    • Fasteners for Attaching the Bag Rider and Monopod Weight
  • MasterPiece Arms BA Comp Competition Side Rails – For BA Comp Chassis – Black

    $174.99 Read more

    Competition Side Rails, designed for the BA Comp chassis, provide enhanced stability when shooting “positional” in PRS or NRL Style competitions.

    Adds approximately 75% more width to the bottom of the fore-end, making the rifle more stable when shooting off positional bags.  The radius section on the bottom of the rails provides a more comfortable grip of the fore-end when moving and changing positions.

    The side rails are compatible with the MPA internal weights and Gray Ops CNC Side Rail Weights, available for purchase separately.

    System includes:

    • Left and right side rail
    • 8 “t-nuts”
    • 8 fasteners for attaching the rails to the nuts
    • 8 fasteners for attaching to the MPA Internal Weight System.

    Compatible only with the BA and BA Comp chassis

    Cerakoted black. Other cerakote options, available for an upcharge, include: FDE, Mil Spec OD Green, Gunmetal, Tungsten, Midnight Bronze, NRA Blue, and USMC Red. Please contact MPA if you want a custom color not listed, including Gun Candy.

    See below for compatibility with various arca clamp products:

    • MPA RAT Clamp & RAT Accessories – Compatible
    • Area 419 Knob type Arcalock Clamp – Compatible
    • GrayOps Mini Plate Pro – Compatible
    • GrayOps Mag Cut Mini Plate – Not Compatible
    • GrayOps Amp Elite Multi Plate – Compatible
    • GrayOps Arca Rail Clamp – Throw Lever Style – Compatible
    • Area 419 Harris Bipod Arca Clamp Kit – Compatible
    • Really Right Stuff BTC-Pro Clamp – Not Compatible
    • Really Right Stuff EVO-CA Throw Lever Clamp – Compatible
    • Really Right Stuff SC-LR Throw Lever Clamp – Compatible
    • Really Right Stuff HC-Pro Clamp for Harris Bipod – Not Compatible
    • Cyke Pod Bipods – Compatible
    • Cruxord Tripos – Compatible
    • Leofoto Tripods with Throw Lever Clamp – Compatible
    • RRS Tripos with Throw Lever Clamp – Compatible

    To summarize, most, if not all, throw lever clamps will work with our Comp Side Rails. Most Knob/Thumb Wheel Type Clamps will not function properly.

    We will continue to update this list.

    YouTube video

  • MasterPiece Arms ( MPA ) Ultra Bag Rider

    $59.99 Read more

    Description

    Our new Ultra Bag Rider combines the benefits of the Enhanced Bag Rider design along with a Butt Hook feature.

    This provides a rock solid rear support when using a rear bag when the shooter wants to pull the rifle into the shooters shoulder, improving accuracy performance due to the consistent shoulder pressure applied using this accessory.

    The stability this rear bag rider provides is incredible, especially when shooting groups.  If you’ve ever had some challenges keeping the rifle ultra stable when prone, this accessory will improve performance.

    This Ultra Bag Rider works with all BA, BA Comp, ESR, BA Hybrid & BA lite chassis that have a 3 hole pattern on the bottom of the buttstock.

    It comes with a black Ultra bag rider, 2 Socket Head Cap Screws, and a turned step shaft designed to be inserted into the monopod slot for installation purposes.

    This part is molded and has a lifetime guarantee.

     

  • MasterPiece MPA Matrix Professional Chassis

    $2,095.00 Select options

    Masterpiece Arms Chassis have been the gold standard for Long Range Shooters for the past 8 years. In the PRS, which is the testing ground for the best rifle equipment produced, the MPA Chassis is the #1 Chassis (used by the most shooters), won more 1 and 2 Day matches and the most AG Cup Matches since the series inception. Our Chassis Technology is market leading, allowing shooters who run our chassis to hit more targets, win more matches, and harvest more trophies.

  • Gray Ops CNC MasterPiece Arms MPA Side Rail Inserts For MPA Matrix/ESR Chassis- Aluminum **** Will Fit Matrix Pro With Additional Side Rails

    $84.99 Read more

     

    PURPOSE:

    • Ergonomic gripping locations
    • Light weight (1.6 oz each insert)
    • Multiple Flush Cup locations for accessories such as the “Sikes Clutch”

    FEATURES:

    • Machined from 6061 Aluminum
    • Black Anodize Hard Coat finish
    • Includes (2) two inserts
    • Each insert has 6 built in flush cup locations (12 total per pair) for each sling and accessory attachment
    • Lightweight at 1.6 ounces per insert
    • Hardware to attach to side rails included

    NOTES:

    • MPA Side rails purchased separately via MPA website
    • Inserts only compatible with Side Rails from MPA

     

  • Sale!

    MasterPiece Arms ( MPA ) 2 round holder

    $19.99 Add to cart

    This new 2 Round Holder is designed to fit onto any MPA BA Competition, Standard Chassis, Hybrid, CSR or BA Lite. This is designed for Short Action Calibers with a 0.472 bolt face. (308, 6.5 Creedmoor, 6.5×47 Lapua, 6 Dasher, 6 BR, etc, etc).

    The design of the holder presents the round at a slight angle, making it easier for the shooter to grab hold of the back of the cartridge for quick removal.

    The system attaches to any of the six oblong slots on either side of the magazine well.

    1. Using an Allen wrench, loosen the set screw in the “Chassis Mount” component and slide the unit out of the oblong slot.
    2. Tighten the set screw to secure the Chassis Mount component into the oblong slot.
    3. Attach the 2 Round Holder to the Chassis mount via the button head cap screw that is included.

     

  • MasterPiece Arms ( MPA ) AICS Mag Loader

    $19.99 Read more

    This mag loader works well with all AICS style Magazines

     

  • MasterPiece Arms ( MPA ) 2 round Magazine Extension

    MasterPiece Arms ( MPA ) 2 round Magazine Extension

    $49.00 Add to cart

    Description

    MPA Mag Extender is designed for 308 Box magazines built by AICS or Accurate Mag – single feed only. (Will not work with AW Mags). Simply remove the existing floorplate, remove the base insert (from the Accurate Mags only), depress the spring into the mag body, slide the mag extender in place and secure with the included 6-32 set screw. Make sure the mag spring has seated itself flush with the bottom of the mag extender.

    Produced from 6061 Aluminum. Cerakote Black  and laser engraved.

    Increases the magazine capacity to 14 rounds.

    Specify Magazine Type (Accurate or AICS)/

    There is also a version for 6BR case magazines. To get this extender type, please select the appropriate magazine type on the menu. These 4 Round extenders will work with MPA, Freedom Gunworks and PVA 6BR Kits.

     

  • MasterPiece Arms ( MPA ) Cheek Riser Locator Collars

    $26.99 Read more

    Attach these shaft collar to your guide rods on any MPA Chassis cheek riser assy to provide a quick, easy and consistent method of relocating your cheek riser to your predetermined position. These work with chassis with and without a thumb wheel system.

    For those with a thumb wheel design, simply remove the thumb wheel from the cheek riser assy, install these shaft collars, set the appropriate height position and your repeatibility to that position will be the same everytime you remove your cheek riser and re-install it.

    Takes about 5 minutes to install. Price includes shipping.

  • Sale!

    Gray Ops CNC MasterPiece Arms MPA Side Rail Inserts For MPA BA COMP Chassis- Aluminum – Black

    $67.99 Add to cart

     

    PURPOSE:

    • Ergonomic gripping locations
    • Light weight (1.6 oz each insert)
    • Multiple Flush Cup locations for accessories such as the “Sikes Clutch”

    FEATURES:

    • Machined from 6061 Aluminum
    • Black Anodize Hard Coat finish
    • Includes (2) two inserts
    • Each insert has 6 built in flush cup locations (12 total per pair) for each sling and accessory attachment
    • Lightweight at 1.6 ounces per insert
    • Hardware to attach to side rails included

    NOTES:

    • MPA Side rails purchased separately via MPA website
    • Inserts only compatible with Side Rails from MPA

     

  • MasterPiece Arms ( MPA ) Tall Cheek Riser Pins

    $34.99 Read more

    These tall cheek riser pins work with any of the buttstocks on our BA Chassis. These are exactly 1″ taller than the standard pins.

    Included will be an MPA Cheek Riser pad that may be needed when installing these pins.

     

  • MasterPiece Arms ( MPA ) Spigot Mount

    MasterPiece Arms ( MPA ) Bag Rider with Flush Cup

    $29.00 Add to cart

    This bag rider design, with the included flush cup, was an idea from Dave Preston, winner of the 2015 PRS Series. The bag rider attaches to your MPA BA Chassis, Comp Chassis or BA Lite Chassis that has a threaded three hole pattern in the bottom of the buttstock body. Its general purpose is to allow a consistent management of recoil when using a rear bag.

    The purpose the flush cup, as conceived by Dave, is used when shooting certain positional stances when a sling is used to provide support for the rifle. Have the rear connection point on the bottom of the rifle pulls the rifle downward, as compared to side positioned flush cups which can trend the rifle laterally.

  • MasterPiece Arms BA COMP Chassis COMPLETE Weight Tuning KIT - MPA

    MasterPiece Arms MATRIX Chassis COMPLETE Weight Tuning KIT – MPA

    $174.99 Add to cart

    The Complete Weight Tuning Kit for the full size BA/Comp Chassis & ESR Chassis includes the following:

    • Steel Enhanced Bag Rider – 1.2 lbs
    • Steel Monopod Weight – 1 lb
    • Front Fore-end Weight – 1.2 lbs
    • Rear Fore-end Weight – 1 lb
    • 8 Front Fore-end clamps
    • 8 Button Head Cap Screws for the clamps
    • Fasteners for Attaching the Bag Rider and Monopod Weight
  • OBi LINK SYSTEM — ROUND POST MPA MATRIX PRO

    $54.99 Add to cart

    The Round Post Matrix Pro or RPM mounts to the M-lok slot on the forend of your MPA Matrix Pro rifle stock or any other piece of gear with an M-lok slot or similar hole spacing. Once it is attached to your rifle or other equipment, it connects to any of the Lock or Grip On families.

    *RP M*

    -Mounts to MPA Matrix Pro forend and gives enough clearance for the wide body-

    -Mounts to M-lok rail.-

    -M-lok hardware is included. –
    -Connects to Lock family-
    -Connects to Grip On family-

     

    *CLAMP LOCK with TEK-LOK*

    -Attaches to belt or 1.5-inch strap

     

    *CLAMP LOCK*

    Bolts to the strap. Won’t ever move.

    Can be used on 1/2 inch – 1.5-inch strap.

    Can be used vertically or horizontally.

    4x mounting screws included.

    *CLAMP LOCK*

    Bolts to the strap. Won’t ever move.

    Can be used on 1/2 inch – 1.5-inch strap.

    Can be used vertically or horizontally.

    4x mounting screws included.

  • MasterPiece Arms ( MPA ) Magwell Plate: Teeth -for Matrix Pro

    $83.99 Add to cart

    This magwell plate system is for the BA Comp, ESR, Hybrid and Matrix short action chassis. These plates are designed to protect the magazine and provide the benefit of giving the shooter additional stability when shooting positional stages by digging into the positional bag.

    The plates can be purchased individually or a complete kit. See the drop down menu for options.

    Machined from Solid 6061 aluminum, black anodized, ready to install.

    These magwell plates are designed only for the BA Comp, ESR, Hybrid and Matrix Chassis short action chassis. (Not the Matrix Pro or Hybrid CZ).

    These plates may require the purchase of the Magwell Plate System Upgrade to be used on your existing chassis.

    If your chassis does not have the 4 drilled and tapped holes around the front action screw hole, you will need to update your chassis.

    Here is a link to this product upgrade.

    If your chassis does currently have the 4 hole pattern, these are ready to be installed with no modifications.

     

MasterPiece Arms

Other Brands

Shopping Cart

Active filters

Subscribe, Save & Win!

Subscribe to our email newsletter and you will be the first to hear about our sales, contests and giveaways!