MDT
MDT was born out of a single purpose: to provide better value and better accuracy for precision rifles. The first MDT chassis was developed from the ground up based on the needs of shooters.
Our engineers verified every function and feature based on the input from competitive shooters. The end results was a game-changing product called the TAC21 that continues to perform at the range, in the field and in competitions around the world.
-
Short Action Precision ( SAP ) Ckye-Pod Quick Adjust Lever
$34.99 Read moreWORKS WITH ALL Gen I and Gen II Ckye-Pods
Are you tired of using an Allen wrench every time you want to adjust the tension on your tilt on your Ckye-Pod? We have the solution!
Replace that Allen bolt on your Ckye-Pod with this rugged handle. A bipod lever makes for fast tension adjustments, and allows you to also lock it down in any position. This Short Action Precision exclusive accessory is a must have for any Ckye-Pod owner!
- Installs easily in under 2 minutes with just an Allen wrench
- Works will all models and generations of Ckye-Pods
- Compatible with MDT Ckye-Pods
- 30mm (~1.30″) zinc die-cast handle
- Stainless steel components
- Black powder coat finish
-
MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 10 RND – no binder plate
$79.99 Add to cartThese magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate. See details below for benefits and limitations of each version.
-
MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 12 RND – no binder plate
$94.95 Add to cartPRODUCT DETAILS
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate. See details below for benefits and limitations of each version.
DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
- 3.055” Outside Length
- 2.870” max cartridge overall length (COAL) with binder plate
- 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
- 4.61” Rear Height
COMPATIBILITY
- 308WIN
- 6mm Creedmoor
- 243WIN
- 260 Rem
- 6.5 Creedmoor
- 7mm-08 Win
- 308/7.62×51 NATO
- 22 – 250 Rem (will work at a reduced capacity)
BINDER PLATE DETAILS
- The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
- The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
-
MDT .308/6.5 CREEDMOOR METAL AICS MAGAZINE – 5 RND – no binder plate
$79.95 Add to cartPRODUCT DETAILS
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Available with or without the front binder plate. See details below for benefits and limitations of each version.
DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
- 3.055” Outside Length
- 2.870” max cartridge overall length (COAL) with binder plate
- 2.960” max cartridge overall length (COAL) without binder plate (see limitations below)
- 2.52” Rear Height
COMPATIBILITY
- 308WIN
- 6mm Creedmoor
- 243WIN
- 260 Rem
- 6.5 Creedmoor
- 7mm-08 Win
- 308/7.62×51 NATO
- 22 – 250 Rem (will work at a reduced capacity)
BINDER PLATE DETAILS
- The magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.
- The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).
-
MDT .223 METAL AICS MAGAZINE 10 round
$79.95 Add to cartPRODUCT DETAILS
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
DETAILS
MDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.
SPECIFICATIONS
10-Round:
- 3.055” Outside Length
- 3.90″ Rear Height (same height as MDT 10-rd .308 metal magazines)
- 2.50” max cartridge overall length (COAL)
- Polymer feedlip inserts extend ~0.5″ past the end of the metal feedlip backer, thus retaining the round longer, helping ensure the tip of the round has entered the chamber before the rear of the round is released.
MDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.
10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.
COMPATIBILITY
- 223 Rem
- 5.56 NATO
-
MDT .223 POLYMER AICS MAGAZINE 10 Round
$44.95 Add to cartPRODUCT DETAILS
Polymer MDT AICS External Box Magazines for MDT Chassis systems. Also works in many other M24 type chassis and bottom metals.
DETAILS
MDT Detachable AICS box magazines are designed to fit the MDT TAC21, ACC, ESS, LSS-XL, XRS and LSS Chassis systems, as well as many other M24 type chassis and bottom metals. Manufactured from high quality Polymer and uses a tempered steel spring.
We put our magazines through vigorous testing. We have used high quality strength polymer with a high glass content to ensure durability and strength. Although not unbreakable, we have driven over these magazines with cars and trucks which did not break them.
CAPACITY
- .223REM family of cartridges: 10 Rounds
- MAX OAL: 2.550″
COMPATIBILITY
MDT AICS magazines are guaranteed to work in our XRS, TAC21, LSS, LSS-XL, HS3, ESS and ACC chassis systems.
They do not work with the following inlets; Browning X-bolt, Winchester XPC and may require fitting in Winchester Model 70. Based on customer feedback, the following systems work well with our magazines, but fitting may be required in some cases.
- XLR Chassis
- KRG X-Ray – Some need adjustment
- GRS riflestocks- (Configured for AICS magazines)
- CDI Precision bottom metals- (Configured for AICS magazines)
- Pacific tool and Gauge bottom metals- (Configured for AICS magazines)
COMPATIBLE CALIBERS
- 223 Rem
- 5.56 NATO
